ThePipingMart Blog Grades 6060 Aluminum Alloy (UNS A96060) – Composition, Properties and Uses

6060 Aluminum Alloy (UNS A96060) – Composition, Properties and Uses

Aluminium 6060

Aluminum is undoubtedly one of the most versatile metals in various industries today. One of its critical alloys that has caught the attention of manufacturers is the UNS A96060, also known as the 6060 aluminum alloy. This grade of aluminum has an excellent combination of strength, durability, and machinability, making it suitable for constructing high-strength structures, transportation equipment, and architectural use. In terms of properties, the 6060 aluminum alloy has excellent resistance to corrosion and high thermal conductivity and is easily extruded to produce a variety of complex shapes. Its versatility and ease of processing have made it popular among manufacturers looking to combine durability with excellent design aesthetics. Aluminium 6060 is an alloy of aluminum that has been around for decades. It is a versatile alloy used in a wide range of applications due to its strength and corrosion resistance. It is also easy to machine and weld. In this blog post, we’ll explore the many uses of aluminium 6060, including its corrosion resistance, heat resistance, heat treatment process, machining capabilities and welding properties.

What Forms of 6060 Aluminum is Available at Piping Mart?

  • 6060 Aluminum Pipe
  • 6060 Aluminum Tubing
  • 6060 Aluminum Valves
  • 6060 Aluminum Flanges
  • 6060 Aluminum Fasteners
  • 6060 Aluminum Sheet Plates
  • 6060 Aluminum Pipe Fittings
  • 6060 Aluminum Forged Fitting

6060 Aluminum Composition

Element Content (%)
Aluminum, Al 97.8
Magnesium, Mg 0.35-0.60
Silicon, Si 0.30-0.60
Iron, Fe 0.10-0.30
Zinc, Zn 0.15
Titanium, Ti 0.10
Copper, Cu 0.10
Chromium, Cr 0.050
Manganese, Mn 0.10
Other, total 0.15
Other, each 0.050

6060 Aluminum Physical Properties

Properties Metric Imperial
Density 2.70 g/cc 0.0975 lb/in³

6060 Aluminum Equivalents

  • ASTM B221

6060 Aluminum Uses

Aluminum 6060 is an all-purpose alloy with a wide range of uses. It can be used in aircraft components due to its high strength-to-weight ratio. It is also often used in automotive parts such as wheels and panels due to its low cost and good formability. Additionally, it is often used in architectural structures because it does not corrode easily and can be easily fabricated into various shapes.

6060 Aluminum Uses in Industries

  • Aerospace Industry
  • Automotive Industry
  • Construction Industry
  • Electrical Industry
  • Marine Industry

6060 Aluminum Corrosion Resistance

Aluminum 6060 has excellent corrosion resistance when exposed to air or moisture. This makes it ideal for outdoor use, where it will be exposed to rain or snow. Additionally, the natural oxide layer on the surface helps protect against further corrosion by acting as a barrier between the metal’s surface and the environment.

6060 Aluminum Heat Resistance

Aluminum 6060 has excellent heat resistance compared to other materials like steel or copper. This makes it suitable for applications that require frequent exposure to high temperatures, such as automotive exhaust systems or engine components. Additionally, its ability to withstand high temperatures without losing any strength gives it an advantage over other materials, which become brittle at higher temperatures making them prone to cracking or breaking under stress.

6060 Aluminum Heat Treatment

Aluminium 6060 can be heat treated using various processes such as solution heat treatment or precipitation hardening for different desired results like improved tensile strength or increased ductility. The most common type of heat treatment for this alloy is solution heat treating, which involves heating up the metal above its recrystallization temperature before quickly cooling it down again. This process increases the metal’s hardness while still maintaining good ductility.

6060 Aluminum Machining

Aluminium 6060 is relatively easy to machine compared to other materials due to its softness. However, care must still be taken when machining this material since excessive cutting speeds may cause burrs, tears, chip outs, etc. Additionally, this material may require special tools, such as sharper cutting edges than what would normally be required when machining other materials.

6060 Aluminum Welding

Welding aluminium 606 can be done using standard welding techniques such as TIG welding, MIG welding, gas tungsten arc welding (GTAW), etc. However, care must still be taken since this material may require special precautions, such as preheating before welding, in order to avoid cracking during cooling after welds have been made. Additionally, filler material should always match base material, and only highly experienced welders should attempt welding this material.


In conclusion, aluminium 6060 is an all-purpose alloy that has many uses due to its excellent strength-to-weight ratio and corrosion resistance. It is also relatively easy to machine and weld using standard techniques with some extra precautions taken into account, like preheating before welding or sharper cutting edges when machining. With these considerations in mind, aluminium 6060 could prove beneficial in many applications requiring a lightweight yet durable material with good corrosion-resistant properties.

Related Post