ThePipingMart Blog Metals Cleaning Copper : A Step-by-Step Guide

Cleaning Copper : A Step-by-Step Guide

Cleaning Copper Jewellery

Copper is a classic and timeless choice for any occasion, but it can often look dull or tarnished. However, cleaning your copper can be a smooth process. With the right supplies and just a few simple steps, you can keep your copper looking as good as new. Here’s how you can clean your copper easily and effectively.

How to Clean Copper?

Cleaning copper can be a simple task when you have the right tools and know-how. The most important thing is to sample a cleaning practice on an inconspicuous area first, as certain agents may cause damage or discoloration. For light dirt and oxidation, warm water and a small amount of mild detergent are all that’s needed. If the piece has more dirt and grime on it, you can use white vinegar, either full strength or diluted with water to dampen the area first before using a soft cloth to scrub away the residue. If there is tarnish present, consider using special polishes or cloths that contain chemicals meant specifically for metals like copper. Make sure to always rinse off any cleaners thoroughly with cool water before drying the item for best results.

Step One: Gather Your Supplies

The first step is gathering all the supplies you need for the job. You will need baking soda, white vinegar, salt, water, a soft cloth or towel, and dish soap. Once you have all of these items on hand, you’re ready to start cleaning!

Step Two: Make Your Cleaning Solution

Mix about half a cup of white vinegar and one tablespoon of baking soda in a bowl. Add two tablespoons of salt to this mixture and stir everything together until it forms a paste. This paste will form the base of your cleaning solution.

Add in some dish soap and then slowly stir in warm water until it reaches the consistency of toothpaste. Don’t worry if it doesn’t seem thick enough—you can always add more baking soda if needed. Now that your cleaning solution is ready to go, grab your soft cloth or towel and get started!

Step Three: Cleaning Your Products

Dip your cloth into the cleaning solution and then gently rub it over your copper jewellery until it is completely covered with the mixture. Let the mixture sit on the copper for about 10 minutes before rinsing off with warm water (it should come off easily). If any stubborn spots don’t come off with water, try using an old toothbrush and gently scrub them away. Be sure to use only a little pressure when scrubbing so that you don’t damage the metal!

Step Four: Dry Off Your Copper

Once all of the dirt has been removed from your jewellery, use a soft cloth or towel to dry off any excess moisture from its surface. Make sure to wipe away any remaining residue from the cleaning solution before storing away your jewellery in an airtight container or plastic bag for safekeeping!


Cleaning copper jewellery doesn’t have to be complicated or time-consuming – all you need are some basic supplies and a few easy steps! We hope this guide has helped you learn how to keep your copper jewellery looking beautiful for years to come; after all, nothing beats that classic shine! With regular maintenance and care following these simple steps above, you’ll never have to worry about tarnished copper again!

Related Post