ThePipingMart Blog Metals How to Anodize Titanium Green – An Overview

How to Anodize Titanium Green – An Overview

How to Anodize Titanium Green

Anodizing titanium is a great way to add a vibrant green finish to your metal surfaces. It’s an easy, cost-effective process that can be done at home without any specialized equipment. Anodizing your titanium pieces will also protect them from corrosion and wear, making them last much longer. In this blog post, we’ll look at the steps required to anodize your titanium pieces in green.

What You Need

The first step of the process is gathering all the supplies you’ll need. These include an anode (an electrically conductive material), a container for the electrolyte solution (such as a plastic dishpan or bucket), some distilled water, and some sodium hydroxide (also known as lye). You’ll also need some electrical cables and clamps that attach to the anode and to each piece of titanium you wish to anodize. Finally, you may need some non-metallic objects, such as wood blocks or plastic containers, to act as spacers between the pieces of titanium, so they don’t come into contact with each other during the process.

Anodizing Process

Once you have all your supplies ready, it’s time to begin the anodizing process. Start by preparing your electrolyte solution by adding one cup of sodium hydroxide per gallon of distilled water to your container. Make sure everything is mixed well before submerging your titanium pieces into the solution. Attach one end of each cable clamp to a piece of titanium, then attach the other end of each cable clamp to the anode. You should also make sure that no two pieces of titanium are connected together while they are submerged in the electrolyte solution; otherwise, they will short out and not get properly anodized. The next step is hooking up your electrical source—a battery charger works best—to both ends of the cables and turning it on for about half an hour until you achieve desired results. As soon as you are happy with how it looks, turn off the power source immediately and remove all components from their respective solutions for cleaning and drying purposes.


Anodizing titanium green does take some patience, but with practice, you can easily do it yourself at home with minimal cost involved! With these simple steps, you can give any piece of metal surface a vibrant green finish that will stand out from others while protecting it from corrosion and wear at the same time! All that’s left now is to enjoy your beautiful new piece! Have fun experimenting with different colours too!

Related Post