ThePipingMart Blog Metals How to Bend Brass Plate – An Overview

How to Bend Brass Plate – An Overview

How to Bend Brass Plate

Brass has been used for centuries to make decorative and functional items. It can be easily manipulated with a few simple tools, making it perfect for a variety of projects. In this article, we will be focusing on how to bend brass plates into any shape you desire.

Tools You Need

Before you start bending brass plate, you will need some basic tools. These include a pair of pliers, an anvil or other flat surface, a torch or propane burner to heat up the metal, and a hammer for pounding out the bends. You may also want to invest in some clamps or vise grips to help hold the pieces of brass in place while you work on them.

Heating Up Your Brass Plate

Once you have your supplies ready and handy, it’s time to begin heating up your brass plate. Heat up one side of the brass until it is glowing red hot. Make sure that you do not heat it up too much, as this can cause the metal to crack or break apart when bent. Once the side is hot enough, turn off the heat and begin bending the metal while still hot using your pliers or hammer and anvil. Apply pressure evenly as you bend the metal into whatever shape you desire. Be careful not to over-bend, as this can weaken the structure of your piece and result in cracking or breaking when cooled down.

Cooling Down Your Brass Plate

Once all parts have been bent into shape, let them cool down completely before handling them again. This should take only a few minutes, depending on how large or small your project is. Once cooled down completely, check for any cracks or breaks that might have occurred from over-bending during heating and adjust accordingly if necessary before moving onto assembly (if applicable).


Bending brass plates may seem like a daunting task at first, but with some practice and patience, it can be done pretty easily with just a few basic tools! With just these few steps outlined above, anyone can quickly learn how to manipulate sheet metal into whatever shape they desire! Whether for decorative purposes or functional use, bending brass plates is definitely worth giving a try!

Related Post