ThePipingMart Blog Metals How to Bend Copper Tubing 90 Degrees: A Step-By-Step Guide

How to Bend Copper Tubing 90 Degrees: A Step-By-Step Guide

How to Bend Copper Tubing 90 Degrees

One of the most frustrating tasks for a plumber or do-it-yourselfer is bending copper tubing. If done wrong, you can create pinholes or cracks in the tubing, which can cause major problems down the road. But with a few simple steps and the right tools, you can bend copper tubing into neat 90-degree angles that look professional and won’t leak. Let’s take a look at how to do it.

Step 1: Select Your Pipe Bender

The first step is to select the right pipe bender for your job. There are many different types of benders available, but for 90-degree bends in copper tubing, we recommend using either a heavy-duty spring-type bender or an adjustable ratchet-type bender. Both options will make bending easier and more accurate than using a manual hand blender.

Step 2: Mark Your Tube

Once you have your pipe bender ready, mark the spot on your tube where you want to make your bend. It’s important to be as precise as possible here so that you don’t end up with crooked bends or kinks in your tube. You can use a metal marker for this step. Make sure to wear safety glasses when marking metal tubing!

Step 3: Bend The Tube

Now that you’ve marked your spot, it’s time to actually make the bend! Place the tube in the pipe bender and adjust it so that it lines up with your mark. Then press down firmly on the handle while turning it until you reach the desired angle. For maximum accuracy, use a protractor or angle finder to measure your results and make any necessary adjustments before moving on to the next step.


Bending copper tubing doesn’t have to be difficult if you follow these steps and use the right tools! With some patience and practice, anyone can master this skill in no time at all and create beautiful bends with perfect angles every time! Whether you’re an experienced plumber or just starting out, mastering copper tubing bending is essential for any successful project. So get out there and give it a shot! Good luck!

Related Post