ThePipingMart Blog Metals How to Clean Inconel Pipes – A Complete Guide

How to Clean Inconel Pipes – A Complete Guide

How to Clean Inconel Pipes

Inconel is a superalloy made from nickel, chromium, and iron. It’s extremely corrosion-resistant and heat-resistant, making it an excellent choice for pipes used in industrial settings. However, if you clean your Inconel pipes properly, they can avoid becoming clogged and may not be as effective as they should be. Fortunately, cleaning and maintaining your Inconel pipes can be easy and straightforward with the right approach.

Cleaning Your Pipes

The first step to cleaning your Inconel pipes is to make sure that you use soap or detergent designed explicitly for metal surfaces. Non-metal soaps may damage the surface of the pipe and could lead to corrosion over time. You should also use a soft brush or cloth when scrubbing down the pipe to avoid scratches or gouges that could eventually lead to rust spots. Make sure to rinse off all the soap after you’ve finished scrubbing, as leaving it on could cause further damage.

Remove Contaminants

If there are any contaminants on the surface of your Inconel pipe—like grease or oil—you’ll need to remove them before applying any soaps or detergents. The best way to do this is by using a degreaser specifically designed for metal surfaces; this will help ensure no damage while effectively removing all traces of grease and oil from the pipe’s surface. After applying the degreaser, let it sit for at least 10 minutes before rinsing it with clean water.

Polish Your Pipes

You can also polish your Inconel pipes if you want them to look their best. To do this, start using steel wool on all visible surfaces; this will help get rid of any dirt or grime accumulated over time and will help give your pipes an even finish when you’re done polishing them. Once all visible surfaces have been polished with steel wool, apply some metal polish to a soft cloth and rub it into all exposed areas until a shine appears on the surface of your pipe. Finally, use another clean cloth to wipe away any excess polish, and voila!—your pipes are now looking their best!


Keeping your Inconel pipes clean can be simple if you know what steps to take. First, make sure you use soap or detergent designed explicitly for metal surfaces when cleaning them; then remove any contaminants like grease or oil with a degreaser; finally, polish up any visible surfaces with steel wool followed by metal polish for an extra shine! With these steps in mind, cleaning your Inconel pipes will be less intimidating than it might seem!

Related Post