ThePipingMart Blog Metals How to Cut Steel Pipe? An Overview

How to Cut Steel Pipe? An Overview

How to Cut Steel Pipe?

Are you looking for an inexpensive and efficient way to cut steel pipe for your next DIY project? If so, you’ve come to the right place. Today, we’ll discuss the different methods you can use to cut steel pipe and how each works. Let’s get started!

Using a Hacksaw

The most common way to cut steel pipe is with a hacksaw. A hacksaw consists of a handle and a long, thin sawblade that is ideal for cutting through tough materials like metal. To start:

  • Ensure you have the correct blade type for cutting metal. You can find these types of blades at any hardware store or online retailer.
  • Ensure that the steel pipe is securely clamped in a vise before starting to see.
  • Once everything is ready, begin making a shallow groove in the metal using slow, even strokes.
  • Increase the pressure as you continue sawing until the pipe has been fully cut through.

Using an Angle Grinder

If you want to make quick work of cutting steel pipe, then an angle grinder is your best bet. An angle grinder is a handheld power tool with a rotating disc explicitly designed for grinding and cutting metal and stone surfaces. Before beginning your cut, ensure that the steel pipe and yourself are well-protected from sparks produced by the angle grinder—safety glasses are highly recommended! Once everything is set up correctly, slowly move along the length of your pipe as you press down on the disc until it has been fully cut through. Depending on how thick your pipe is, this could take anywhere from 30 seconds to several minutes.

Using an Oxy-Acetylene Torch

Finally, you have access to an oxy-acetylene torch. This may be your preferred method of cutting steel pipes due to its efficiency and precision compared to other methods, such as using a hacksaw or angle grinder. As always, before starting any major project involving tools such as torches, it’s essential to read all instructions carefully before attempting any cuts on your own—even if you’re experienced—to ensure safety at all times! With that said, after setting up correctly, begin by lighting your torch and slowly moving along the length of your pipe while heating it until it has been fully cut through. This process should only take 10-15 minutes, depending on how thick the material being cut is – much faster than either method above!


Whether you decide to use a hacksaw, angle grinder, or oxy-acetylene torch depends mainly on what kind of project you’re working on and what type of tools are available at your disposal. All three methods outlined above can be used effectively to get desired results when cutting steel pipes! Whichever way you choose, remember that safety must always come first! With these tips in mind, start cutting those pipes like never before! Happy building, everyone!

Related Post