ThePipingMart Blog Metals How to Polish Brass – A Complete Guide

How to Polish Brass – A Complete Guide

How to polish brass

Adding a touch of brass can add an element of sophistication and style to any room. But it takes more than just buying some new brass fixtures for your home to make them look their best. To bring out the shine and luster of brass, you’ll need to give your pieces a good polish. Here’s everything you need to know about polishing brass so that it looks its very best.

How to Polish Brass

To polish brass fixtures, clean off dirt or grime with warm water and dish soap. Rinse thoroughly with clean water and then dry with a soft cloth. Once this is done, you can move on to the actual polishing process.

For most pieces, using a commercial metal polish will do the trick. You can find these at your local hardware store or online. Apply a small amount of the polish onto a soft cloth or cotton ball and rub gently in circles over the surface of the brass. You may need to use an old toothbrush or soft-bristled brush for hard-to-reach areas like crevices and corners. Keep rubbing until all traces of tarnish are gone, then wipe off any excess polish with another clean cloth before buffing lightly to bring out the shine.

If you prefer not to use commercial products, natural alternatives also work just as well! To make this homemade solution, mix equal parts salt and baking soda and some white vinegar or lemon juice until it forms a thick paste (the consistency should be similar to toothpaste). Apply this paste onto your piece using either a soft cloth or cotton ball, making sure that you scrub away any tarnish spots as you go along; rinse off when finished and buff lightly once dry for added shine!

What You’ll Need

To polish brass, you will need the following supplies:
-A soft cloth
-Mild dish soap
-Baking soda
-Lemon juice

Preparing the Brass

Before you begin polishing the brass, you will need to clean it. Begin by wipe the piece down with a soft cloth and water. If the brass is particularly dirty, you can add a drop of mild dish soap to the water. Next, use a baking soda paste to scrub away any stubborn dirt or grime. To make the paste, mix together equal parts baking soda and water. Once the brass is clean, rinse it off with water and dry it with a soft cloth.

Polishing the Brass

There are several different ways that you can polish brass. One popular method is to use a vinegar and water solution. To make this solution, mix together equal parts vinegar and water. Another option is to use a lemon juice and water solution. To make this solution, mix together equal parts lemon juice and water. Whichever solution you choose, apply it to the brass with a soft cloth and rub in a circular motion until the brass is shiny.

Protecting the Brass

Once you have polished the brass, you will need to protect it from tarnishing. To do this, apply a thin layer of clear lacquer or wax to the surface of the brass. Allow the lacquer or wax to dry completely before using or handling the piece


Polishing brass is not difficult, but it does require attention to detail — especially when dealing with intricate details like crevices and corners — for it looks its best. With regular maintenance and care, your brass fixtures can remain sparkling clean for years to come! If you take the time needed for proper polishing techniques now, you’ll be rewarded later with beautiful results that will last – so don’t be afraid to get out there and give those items some TLC!

Related Post