Flanges Archives - ThePipingMart Blog

Slip-On Flanges in Specialized Environments: High-Temperature and Corrosive Applications

Sakshee Gaikwad — Sat, 09 Mar 2024 19:40:54 +0000

Slip-on flanges, or SO flanges, are popular in piping systems to connect pipes, valves, and pumps. These flanges slide over the end of the pipe and are welded in place, making them ideal for low-pressure applications. However, with technological advancements, slip-on flanges are now utilized in specialized environments, including high-temperature and corrosive applications.

This blog post aims to provide an in-depth analysis of slip-on flanges in specialized environments. The article will explore the use of slip-on flanges in high-temperature and corrosive applications and how they differ from traditional SO flanges.

Slip-On Flanges in Specialized Environments: High-Temperature and Corrosive Applications

High-Temperature Applications:

In high-temperature applications, slip-on flanges are made from heat-resistant materials, including Carbon Steel, Alloy Steel, and Stainless Steel. These materials are tested to withstand high temperatures, up to 650 degrees Celsius. High-temperature slip-on flanges are commonly used in industries such as power plants and chemical plants where high-pressure steam and gases require tight sealing.

One significant difference between high-temperature slip-on flanges and regular SO flanges is the gasket material. High-temperature slip-on flanges require specialized gasket materials to withstand extreme temperatures and pressure. Common gasket materials include compressed graphite and PTFE.

Corrosive Applications:

Slip-on flanges also shine in corrosive environments. In industry sectors such as oil and gas refineries, chemical processing plants, and paper mills, slip-on flanges connect pipes that carry corrosive substances. They are made from materials that can withstand harsh chemicals, including Duplex Stainless Steel and Titanium.

Corrosive slip-on flanges require specialized coatings to protect against corrosion, including Teflon and Fusion Bonded Epoxy. The coatings help prolong the slip-on flanges’ life and prevent corrosion failure.

SO Flanges Vs. S2pecialized Slip-On Flanges:

Although slip-on flanges have the same basic design as SO flanges, there are significant differences between the two in specialized environments. Slip-on flanges in specialized environments require specific materials and coatings to withstand high temperatures and chemicals. They also require specialized gasket materials to ensure tight sealing and prevent leaks.

Combining High-Temperature and Corrosive Applications

Some environments involve both high temperatures and corrosive substances. For example, pipelines and equipment may be exposed to high temperatures and corrosive substances in chemical processing plants. In these environments, it is important to select slip-on flanges that can withstand both conditions. Materials such as Inconel can withstand both high temperatures and corrosive substances, making them a popular choice for these applications.

Flange Maintenance and Inspection

Regardless of the application, it is important to perform regular maintenance and inspection of slip-on flanges to ensure they function properly. This includes checking for leaks, inspecting the flange surface for any damage or wear, and checking for signs of corrosion. Proper maintenance and inspection can prevent safety hazards and extend the lifespan of the slip-on flanges.

Choosing the Right Supplier

When choosing slip-on flanges for specialized applications, working with a knowledgeable and experienced supplier is important. A reputable supplier can recommend your application’s appropriate material, thickness, and design. They can also guide maintenance and inspection to ensure the slip-on flanges function properly and safely.

Conclusion:

In conclusion, slip-on flanges are highly versatile and offer significant benefits in specialized environments such as high-temperature and corrosive applications. Slip-on flanges in such environments are made from specific materials and coatings and require specialized gasket materials to ensure tight sealing. Only certified and reputable manufacturers should be used to produce slip-on flanges for these specialized environments. Choosing the right slip-on flange for a specific application can improve performance and help prevent system failures.

The post Slip-On Flanges in Specialized Environments: High-Temperature and Corrosive Applications appeared first on ThePipingMart Blog.

Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 2500

Piping Mart — Mon, 08 Jun 2020 06:27:12 +0000

Blind Orifice flanges ASMEB B 16.36 Dimension

Nominal Pipe Size	Outside Diameter of Raised Face	Outside Diameter of Flange	Minimum Thickness of flange	Length Through Hub	Length Through Hub	Diameter of Hub,	Hub Diameter Beginning	Diameter of counter bore	Diameter of counter bore	Counter bore Depth (From Face)	Counter bore Depth (From Face)	Bore	Bore	Diameter of Pressure Connection,	Drilling Template	Drilling Template	Drilling Template	Drilling Template	Bolt Length [(3), (4)]	Bolt Length [(3), (4)]
	R	S	tf	Slip-On and Threaded Y₂	Weld Neck Y₁	X	oh Chamfer (W.N), A	Back Q₈	Face Q_f	F	G	Slip-On B₂	Weld Neck, B₁	TT	Bolt Circle	Number of Holes	Diameter of Holes	Diameter of Bolts	Machine Bolts	Stud Bolts
1	50.8	160	38.1	92	R18	60.33	6.35	8.74	0.8	25.4	57	33.5	(4)	6.4	108.0	4	1	7/8	150	160
1 1/2	73.0	205	44.5	111	R23	82.55	7.92	11.91	0.8	27.0	79	48.3	(4)	6.4	146.0	4	1 1/4	1 1/8	180	190
2	92.1	235	50.8	127	R26	101.60	7.92	11.91	0.8	27.0	95	60.3	(4)	6.4	171.4	8	1 1/8	1	185	195
2 1/2	104.8	265	57.2	143	R28	111.13	9.53	13.49	1.5	30.2	114	70.3	(4)	6.4	196.8	8	1 1/4	1 1/8	205	215
3	127.0	305	66.7	168	R32	127.00	9.53	13.49	1.5	30.2	133	88.9	(4)	9.5	228.6	8	1 3/8	1 1/4	230	240
4	157.2	355	76.2	190	R38	157.18	11.13	16.66	1.5	33.3	165	114.3	(4)	12.7	273.0	8	1 5/8	1 1/2	260	275
6	215.9	485	108.0	273	R47	228.60	12.70	19.84	1.5	36.5	235	168.3	(4)	12.7	368.3	8	2 1/8	2	350	370
8	269.9	550	127.0	318	R51	279.40	14.27	23.01	1.5	39.7	305	219.1	(4)	12.7	438.2	12	2 1/8	2	385	405
10	323.8	675	165.1	419	R55	342.90	17.48	30.18	2.4	47.6	375	273.0	(4)	12.7	539.8	12	2 5/8	2 1/2	490	515
12	381.0	760	184.2	464	R60	406.40	17.48	33.32	2.4	50.8	441	323.8	(4)	12.7	619.1	12	2 7/8	2 3/4	540	570

Related Search:

asme b16.36 orifice flange pdf, orifice flange dimensions 2500#, orifice class 2500 dimensions, orifice weld neck flange dimensions, slip on threaded b16.36 dimension

GENERAL NOTES:

(a) Dimensions are in millimeters, except for bolts and bolt holes.

(b) All other dimensions are in accordance with ASME B16.5.

.. .

Get Dimensions in pdf

The post Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 2500 appeared first on ThePipingMart Blog.

Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 1500

Piping Mart — Mon, 08 Jun 2020 06:24:37 +0000

Blind Orifice flanges ASMEB B 16.36 Dimension

Nominal Pipe Size	Outside Diameter of Raised Face	Outside Diameter of Flange	Minimum Thickness of flange	Length Through Hub	Length Through Hub	Diameter of Hub,	Hub Diameter Beginning	Diameter of counter bore	Diameter of counter bore	Counter bore Depth (From Face)	Counter bore Depth (From Face)	Bore	Bore	Diameter of Pressure Connection,	Drilling Template	Drilling Template	Drilling Template	Drilling Template	Bolt Length [(3), (4)]	Bolt Length [(3), (4)]
	R	S	tf	Slip-On and Threaded Y₂	Weld Neck Y₁	X	oh Chamfer (W.N), A	Back Q₈	Face Q_f	F	G	Slip-On B₂	Weld Neck, B₁	TT	Bolt Circle	Number of Holes	Diameter of Holes	Diameter of Bolts	Machine Bolts	Stud Bolts
1	50.8	150	38.1	83	R16	50.80	6.35	8.74	0.8	25.4	52	33.5	(4)	6.4	101.6	4	1	7/8	150	160
1 1/2	73.0	180	38.1	89	R20	68.27	6.35	8.74	0.8	25.4	70	48.3	(4)	6.4	123.8	4	1 1/8	1	160	165
2	92.1	215	38.1	102	R24	95.25	7.92	11.91	0.8	27.00	105	60.3	(4)	6.4	165.1	8	1	7/8	150	165
2 1/2	104.8	245	41.3	105	R27	107.95	7.92	11.91	0.8	27.00	124	73.0	(4)	6.4	190.5	8	1 1/8	1	165	180
3	127.0	265	47.7	117	R35	136.53	7.92	11.91	0.8	27.00	133	88.9	(4)	9.5	203.2	8	1 1/4	1 1/8	185	185
4	157.2	310	54.0	124	R39	161.93	7.92	11.91	0.8	27.00	162	114.3	(4)	12.7	241.3	8	1 3/8	1 1/4	205	215
6	215.9	395	82.6	171	R46	211.14	9.52	13.49	1.5	28.6	229	168.3	(4)	12.7	317.5	12	1 1/2	1 3/8	265	280
8	269.9	485	92.1	213	R50	269.88	11.13	16.66	1.5	33.3	292	219.1	(4)	12.7	393.7	12	1 3/4	1 5/8	300	310
10	323.8	585	108.0	254	R54	323.85	11.13	16.66	1.5	33.3	368	273.0	(4)	12.7	482.6	12	2	1 7/8	345	355
12	381.0	675	123.9	283	R58	381.00	14.27	23.01	1.5	39.7	451	323.8	(4)	12.7	571.6	16	2 2/8	2	380	400
14	412.8	750	133.4	298	R63	419.10	15.88	26.97	2.4	44.4	495	355.6	(4)	12.7	635.0	16	2 3/8	2 1/4	415	445
16	469.9	825	146.1	311	R67	469.90	17.48	30.18	2.4	50.8	552	406.4	(4)	12.7	704.8	16	2 5/8	2 1/2	450	485
18	533.4	915	162.0	327	R71	533.40	17.48	30.18	2.4	50.8	597	457.2	(4)	12.7	774.7	16	2 7/8	2 3/4	500	535
20	584.2	985	177.8	356	R75	584.20	17.48	33.32	2.4	54.0	641	508.0	(4)	12.7	831.8	16	3 1/8	3	545	570
24	692.2	1170	203.2	406	R79	692.15	20.62	36.53	2.4	58.7	762	609.6	(4)	12.7	990.6	16	3 5/8	3 1/2	620	660

Related Search:

asme b16.36 orifice flange pdf, orifice flange dimensions 1500#, orifice class 1500 dimensions, orifice weld neck flange dimensions, slip on threaded b16.36 dimension

GENERAL NOTES:

(a) Dimensions are in millimeters, except for bolts and bolt holes.

(b) all other dimensions are in accordance with ASME B16.5.

.. .

Get Dimensions in pdf

The post Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 1500 appeared first on ThePipingMart Blog.

Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 900

Piping Mart — Mon, 08 Jun 2020 06:23:32 +0000

Blind Orifice flanges ASMEB B 16.36 Dimension

Nominal Pipe Size	Outside Diameter of Raised Face	Outside Diameter of Flange	Minimum Thickness of flange	Length Through Hub	Length Through Hub	Diameter of Hub,	Hub Diameter Beginning	Diameter of counter bore	Diameter of counter bore	Counter bore Depth (From Face)	Counter bore Depth (From Face)	Bore	Bore	Diameter of Pressure Connection,	Drilling Template	Drilling Template	Drilling Template	Drilling Template	Bolt Length [(3), (4)]	Bolt Length [(3), (4)]
	R	S	tf	Slip-On and Threaded Y₂	Weld Neck Y₁	X	oh Chamfer (W.N), A	Back Q₈	Face Q_f	F	G	Slip-On B₂	Weld Neck, B₁	TT	Bolt Circle	Number of Holes	Diameter of Holes	Diameter of Bolts	Machine Bolts	Stud Bolts
1	50.8	150	38.1	83	R16	50.80	6.35	8.74	0.8	25.4	52	33.5	(4)	6.4	101.6	4	1	7/8	150	160
1 1/2	73.0	180	38.1	89	R20	68.27	6.35	8.74	0.8	25.4	70	48.3	(4)	6.4	123.8	4	1 1/8	1	160	165
2	92.1	215	38.1	102	R24	95.25	7.92	11.91	0.8	27.00	105	60.3	(4)	6.4	165.1	8	1	7/8	150	165
2 1/2	104.8	245	41.3	105	R27	107.95	7.92	11.91	0.8	27.00	124	73.0	(4)	6.4	190.5	8	1 1/8	1	165	180
3	127.0	240	38.1	102	R31	123.83	7.92	11.91	0.8	27.00	127	88.9	(4)	9.5	190.5	8	1	7/8	150	165
4	157.2	290	44.5	114	R37	149.23	7.92	11.91	0.8	27.00	159	114.3	(4)	12.7	235.0	8	1 1/4	1 1/8	180	190
6	215.9	380	55.6	140	R45	211.12	7.92	11.91	0.8	27.00	235	168.3	(4)	12.7	317.5	12	1 1/4	1 1/8	195	210
8	269.9	470	63.5	162	R49	269.88	7.92	11.91	0.8	27.00	298	219.1	(4)	12.7	393.7	12	1 1/2	1 3/8	230	240
10	323.8	545	69.9	184	R53	323.85	7.92	11.91	0.8	27.00	368	273.0	(4)	12.7	469.9	16	1 1/2	1 3/8	240	255
12	381.0	610	79.4	200	R57	381.00	7.92	11.91	0.8	27.00	419	323.8	(4)	12.7	533.4	20	1 1/2	1 3/8	260	275
14	412.8	640	85.8	213	R62	419.10	11.13	16.66	1.5	33.3	451	355.6	(4)	12.7	558.8	20	1 5/8	1 1/2	280	290
16	469.9	705	88.9	216	R66	469.90	11.13	16.66	1.5	36.5	508	406.4	(4)	12.7	616.0	20	1 3/4	1 5/8	290	305
18	533.4	785	101.6	229	R70	533.40	12.70	19.84	1.5	39.7	565	457.2	(4)	12.7	685.8	20	2	1 7/8	330	350
20	584.2	855	108.0	248	R74	584.20	12.70	19.84	1.5	39.7	622	508.0	(4)	12.7	749.3	20	2 1/8	2	355	375
24	692.2	1040	139.7	292	R78	692.15	15.88	26.97	2.4	47.6	749	609.6	(4)	12.7	901.7	20	2 5/8	2 1/2	445	470

Related Search:

asme b16.36 orifice flange pdf, orifice flange dimensions 900#, orifice class 900 dimensions, orifice weld neck flange dimensions, slip on threaded b16.36 dimension

GENERAL NOTES:

(a) Dimensions are millimeters, except for bolts holes. Reference Mandatory Appendix l for U.S. Customary.

(b) All other dimensions are in accordance with ASME B16.5.

.. .

Get Dimensions in pdf

The post Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 900 appeared first on ThePipingMart Blog.

Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 600

Piping Mart — Tue, 02 Jun 2020 11:07:36 +0000

Blind Orifice flanges ASMEB B 16.36 Dimension

Nominal Pipe Size	Outside Diameter of Raised Face	Outside Diameter of Flange	Minimum Thickness of flange	Length Through Hub	Length Through Hub	Diameter of Hub,	Hub Diameter Beginning	Diameter of counter bore	Diameter of counter bore	Counter bore Depth (From Face)	Counter bore Depth (From Face)	Bore	Bore	Diameter of Pressure Connection,	Drilling Template	Drilling Template	Drilling Template	Drilling Template	Bolt Length [(3), (4)]	Bolt Length [(3), (4)]
	R	S	tf	Slip-On and Threaded Y₂	Weld Neck Y₁	X	oh Chamfer (W.N), A	Back Q₈	Face Q_f	F	G	Slip-On B₂	Weld Neck, B₁	TT	Bolt Circle	Number of Holes	Diameter of Holes	Diameter of Bolts	Machine Bolts	Stud Bolts
1	50.8	125	36.6	81	2	R16	50.8	6.35	8.74	0.8	25.4	54	33.5	(4)	6.4	88.9	4	11/16	3/4	5/8
1 ^1/2	73	155	36.6	84	2	R20	68.27	6.35	8.74	0.8	25.4	70	48.3	(4)	6.4	114.3	4	13/16	7/8	3/4
2	92.1	165	36.6	84	2	R23	82.55	7.92	11.91	0.8	27.0	84	60.3	(4)	6.4	127	8	11/16	3/4	5/8
2 ^1/2	104.8	190	36.6	87	2	R26	101.6	7.92	11.91	0.8	27.0	100	73	(4)	6.4	149.2	8	13/16	7/8	3/4
3	127	210	36.6	87	2	R31	123.83	7.92	11.91	0.8	27.0	117	88.9	(4)	9.5	168.3	8	13/16	7/8	3/4
4	157.2	275	38.1	102	7	R37	149.23	7.92	11.91	0.8	27.0	152	114.3	(4)	12.7	215.9	8	1	1	7/8
6	215.9	355	47.7	117	7	R45	211.12	7.92	11.91	0.8	27.0	222	168.3	(4)	12.7	292.1	12	1 1/8	1 1/8	1
8	269.9	420	55.6	133	7	R49	269.88	7.92	11.91	0.8	27.0	273	219.1	(4)	12.7	349.2	12	1 1/4	1 1/4	1 1/8
10	323.8	510	63.5	152	7	R53	323.85	7.92	11.91	0.8	27.0	343	273.0	(4)	12.7	413.8	16	1 3/8	1 3/8	1 1/4
12	381.0	560	66.7	156	7	R57	381.00	7.92	11.91	0.8	27.0	400	323.8	(4)	12.7	489	20	1 3/8	1 3/8	1 1/4
14	412.8	605	69.9	165	7	R61	419.10	7.92	11.91	0.8	27.0	432	355.6	(4)	12.7	527.0	20	1 1/2	1 1/2	1 3/8
16	469.9	685	76.2	178	7	R65	469.90	7.92	11.91	0.8	30.2	495	406.4	(4)	12.7	603.2	20	1 5/8	1 5/8	1 1/2
18	533.4	745	82.6	184	7	R69	533.40	7.92	11.91	0.8	30.2	546	457.2	(4)	12.7	654.0	20	1 3/4	1 3/4	1 5/8
20	584.2	815	88.9	190	7	R73	584.20	9.53	13.39	1.5	31.8	610	508.0	(4)	12.7	723.9	24	1 3/4	1 3/4	1 5/8
24	692.2	940	101.6	203	7	R77	692.15	11.13	16.66	1.5	36.5	718	609.6	(4)	12.7	838.2	24	2	2	1 7/8
18	533.4	745	82.6	184	7	R69	533.40	7.92	11.91	0.8	30.2	546	457.2	(4)	12.7	654.0	20	1 3/4	1 3/4	1 5/8
20	584.2	815	88.9	190	7	R73	584.20	9.53	13.39	1.5	31.8	610	508.0	(4)	12.7	723.9	24	1 3/4	1 3/4	1 5/8
24	692.2	940	101.6	203	7	R77	692.15	11.13	16.66	1.5	36.5	718	609.6	(4)	12.7	838.2	24	2	2	1 7/8

Related Search:

asme b16.36 orifice flange pdf, orifice flange dimensions 600#, orifice class 600 dimensions, orifice weld neck flange dimensions, slip on threaded b16.36 dimension

GENERAL NOTES:

(a) Dimensions are millimeters, except for bolt holes. Reference Mandatory Appendix l for U.S Customary.

(b) weld neck flnges NPS 3 and identical to Class flanges except for bolting and be used for such service

(c) All other dimentions are in accordance with ASME B16.5

(d) Ring joint flange in NPS 24 will require an angular meter tap as shown in Fig.2

.. .

Get Dimensions in pdf

The post Dimension for Orifice Flanges, Welding Neck ASME B 16.36 Class 600 appeared first on ThePipingMart Blog.

Dimension for Orifice Slip-on, Threaded Flanges ASME B 16.36 Class 300

Piping Mart — Mon, 01 Jun 2020 09:29:04 +0000

Blind Orifice flanges ASMEB B 16.36 Dimension

Nominal Pipe Size	Outside Diameter of Raised Face	Outside Diameter of Flange	Minimum Thickness of flange	Length Through Hub	Length Through Hub	Diameter of Hub,	Hub Diameter Beginning	Diameter of counter bore	Diameter of counter bore	Counter bore Depth (From Face)	Counter bore Depth (From Face)	Bore	Bore	Diameter of Pressure Connection,	Drilling Template	Drilling Template	Drilling Template	Drilling Template	Bolt Length [(3), (4)]	Bolt Length [(3), (4)]
	R	S	tf	Slip-On and Threaded Y₂	Weld Neck Y₁	X	oh Chamfer (W.N), A	Back Q₈	Face Q_f	F	G	Slip-On B₂	Weld Neck, B₁	TT	Bolt Circle	Number of Holes	Diameter of Holes	Diameter of Bolts	Machine Bolts	Stud Bolts
1	50.8	125	36.6	46	81	54	33.4	35.8	33	36.5	19	34.5	(5)	6.4	88.9	4	11/16	5/8	115	125
1 1/2	73	155	36.6	46	84	70	48.3	50.5	48	37.3	18.3	49.5	(5)	6.4	114.3	4	13/16	3/4	120	135
2	92.1	165	36.6	48	84	84	60.3	63.5	59.9	38.1	17.5	61.9	(5)	6.4	127	8	11/16	5/8	115	125
2 1/2	104.8	190	36.6	49	87	100	73	76.2	72.1	44.4	14.3	74.6	(5)	6.4	149.2	8	13/16	3/4	120	135
3	127	210	36.6	51	87	117	88.9	92.2	87.9	46	14.3	90.7	(5)	6.4	168.3	8	13/16	3/4	120	135
4	157.2	255	36.6	52	90	146	114.3	117.6	113	47.6	14.3	116.1	(5)	12.7	200	8	13/16	3/4	120	135
6	215.9	320	36.6	52	98	206	168.3	171.4	166.9	47.6	7.9	170.7	(5)	12.7	269.9	12	7/8	3/4	120	135
8	269.9	380	39.7	60	110	260	219.1	222.2	217.2	55.6	11.1	221.5	(5)	12.7	330.2	12	1	7/8	125	145
10	323.8	445	46.1	65	116	321	273	(6)	(6)	(6)	(6)	276.2	(5)	12.7	387.4	16	1 1/8	1	145	165
12	381	520	49.3	71	129	375	323.8	(6)	(6)	(6)	(6)	327	(5)	12.7	450.8	16	1 1/4	1 1/8	160	180
14	412.8	585	52.4	75	141	425	355.6	(6)	(6)	(6)	(6)	359.2	(5)	12.7	514.4	20	1 1/4	1 1/8	165	185
16	469.9	650	55.6	81	144	483	406.4	(6)	(6)	(6)	(6)	410.5	(5)	12.7	571.5	20	1 3/8	1 1/4	180	195
18	533.4	710	58.8	87	157	533	457	(6)	(6)	(6)	(6)	461.8	(5)	12.7	628.6	24	1 3/8	1 1/4	185	205
20	584.2	775	62	94	160	587	508	(6)	(6)	(6)	(6)	513.1	(5)	12.7	685.8	24	1 3/8	1 1/4	190	215
24	692.2	915	68.3	105	167	702	610	(6)	(6)	(6)	(6)	616	(5)	12.7	812.8	24	1 5/8	1 1/2	210	240

Related Search:

asme b16.36 orifice flange pdf, orifice flange dimensions 300#, orifice class 300 dimensions, orifice weld neck flange dimensions, slip on threaded b16.36 dimension

GENERAL NOTES:
(1) Dimentions are millimeters, except for bolt holes, Reference Mandatory Appendix l for U.S. Customary.

(2) Weld neck flanges NPS 3 AND smller are dimensionlly identical to Classs 600 flanges and may be so marked.

(3) ALL other dimensions are in accordance with ASME B16.5

.. .

Get Dimensions in pdf

The post Dimension for Orifice Slip-on, Threaded Flanges ASME B 16.36 Class 300 appeared first on ThePipingMart Blog.

Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 2500

Piping Mart — Tue, 26 May 2020 09:49:23 +0000

Blind Female Ring Joint Face ASME B 16.48 Class 2500 Dimension

NPS	Inside Dia.	Outside Dai	Centreline	Thickness	Web Width
	B	O	A	t	W
1/2	21	65	90	25.4	38
3/4	27	73	95	28.4	45
1	34	83	110	28.4	54
1 ^1/4	42	102	130	35.1	54
1 ^1/2	48	114	145	38.1	61
2	61	133	170	41.1	57
2 ^1/2	73	149	195	47.8	61
3	89	168	230	50.8	76
4	114	203	270	63.5	83
5	141	241	325	73.2	89
6	168	279	370	82.6	95
8	219	340	440	98.6	95
10	273	425	540	117.3	91
12	324	495	620	133.4	152

Related Search:

asme 16.48 spectacle blind dimension class 2500, class spectacle blind rtj dimension class 2500, spectabcle bline rtj class 2500 dimension

Get Dimensions in pdf

The post Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 2500 appeared first on ThePipingMart Blog.

Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 900

Piping Mart — Tue, 26 May 2020 09:47:52 +0000

Blind Female Ring Joint Face ASME B 16.48 Class 900 Dimension

NPS	Inside Dia.	Outside Dai	Centreline	Thickness	Web Width
	B	O	A	t	W
1/2	21	61	80	22.4	38
3/4	27	67	90	22.4	45
1	34	71	100	22.4	51
1 ^1/4	42	81	115	25.4	51
1 ^1/2	48	92	125	25.4	64
2	61	124	165	31.8	51
2 ^1/2	73	137	190	35.1	67
3	89	155	190	35.1	67
4	114	181	235	41.1	73
5	141	216	280	44.5	73
6	168	241	315	47.8	73
8	219	308	395	57.2	80
10	273	362	470	63.5	121
12	324	419	535	73.2	121
14	356	467	560	82.6	121
16	406	524	615	91.9	127
18	457	594	685	101.6	133
20	508	648	750	111.3	127
24	610	772	900	133.4	140

Related Search:

asme 16.48 spectacle blind dimension class 900, class spectacle blind rtj dimension class 900, spectabcle bline rtj class 900 dimension

Get Dimensions in pdf

The post Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 900 appeared first on ThePipingMart Blog.

Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 300

Piping Mart — Tue, 26 May 2020 09:45:10 +0000

Blind Female Ring Joint Face ASME B 16.48 Class 300 Dimension

NPS	Inside Dia.	Outside Dai	Centreline	Thickness	Web Width
	B	O	A	t	W
1/2	21	51	65	15.7	38
3/4	27	64	80	19.1	45
1	34	70	90	19.1	51
1 ^1/4	42	79	100	22.4	51
1 ^1/2	48	90	115	22.4	57
2	61	108	125	25.4	57
2 ^1/2	73	127	150	28.4	57
3	89	146	170	28.4	57
3 ^1/3	102	159	185	28.4	64
4	114	175	200	31.8	64
5	141	210	235	35.1	70
6	168	241	270	35.1	83
8	219	302	330	41.1	95
10	273	356	385	44.5	102
12	324	413	450	50.8	121
14	356	457	515	53.8	127
16	406	508	570	57.2	127
18	457	575	630	60.5	127
20	508	635	685	69.9	127
24	610	749	810	79.2	152

Related Search:

asme 16.48 spectacle blind dimension class 300, class spectacle blind rtj dimension class 300, spectabcle bline rtj class 300 dimension

Get Dimensions in pdf

The post Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 300 appeared first on ThePipingMart Blog.

Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 150

Piping Mart — Tue, 26 May 2020 09:41:07 +0000

Blind Female Ring Joint Face ASME B 16.48 Class 150 Dimension

NPS	Inside Dia.	Outside Dai	Centreline	Thickness	Web Width
	B	O	A	t	W
1	34	64	80	19.1	51
1 ^1/4	42	73	90	19.1	51
1 ^1/2	48	83	100	19.1	57
2	61	102	120	19.1	57
2 ^1/2	73	121	140	22.4	57
3	89	133	150	22.4	57
3 ^1/2	102	154	175	22.4	64
4	114	172	190	22.4	64
5	141	194	215	25.4	70
6	168	219	240	25.4	83
8	219	273	300	28.4	95
10	273	330	360	31.8	102
12	324	406	430	35.1	121
14	356	426	475	35.1	127
16	406	483	540	38.1	127
18	457	546	580	41.1	127
20	508	597	635	41.1	127
24	610	711	750	47.8	152

Related Search:

asme 16.48 spectacle blind dimension class 150, class spectacle blind rtj dimension class 150, spectabcle bline rtj class 150 dimension

Get Dimensions in pdf

The post Dimension of Blind Female Ring Joint Face ASME B 16.48 Class 150 appeared first on ThePipingMart Blog.