ThePipingMart Blog Metals How to Bend Brass – An Overview

How to Bend Brass – An Overview

How to Bend Brass

Brass is a great metal for DIY projects due to its malleability. It can be used for a variety of projects, from jewelry making to furniture and home decor. Learning how to bend brass can open up a whole new world of possibilities when it comes to DIY projects.

Tools Needed

Before you can start bending brass, there are some tools that you’ll need. First, you’ll need some protective eyewear, as the metal will be hot and could fly into your eyes if not handled properly. You’ll also need an anvil or other sturdy surface where you can hammer the metal. Finally, you’ll need a hammer and, depending on the project, a pipe bender or vice grips.

Heating the Brass

The first step in bending brass is heating it up until it’s malleable enough to bend without breaking. This process can be done with either a blowtorch or kiln; however, if you don’t have access to either of these tools, you can also use boiling water. To do this, place the brass in boiling water for several minutes until it is heated through. Then remove it from the water and allow it to cool down slightly before handling.

Bending the Metal

Once your brass is heated up enough that it can be bent without breaking, it’s time to start shaping it into whatever shape you want! If using a pipe bender or vice grips, simply apply pressure until the desired shape is achieved. However, if using a hammer and anvil (or other surfaces), begin by placing the piece of brass on top of the anvil and hammering along one side until you’ve achieved your desired shape – be sure not to over-hammer as this will cause the metal to crack or break! Once finished with one side, flip over and repeat on the other side until your desired shape is achieved.


Bending brass can open up all kinds of possibilities when it comes to DIY projects. Whether you’re making jewelry or furniture pieces, knowing how to bend brass correctly will help make sure that your project turns out just as planned! Just remember – always wear protective eyewear when working with hot metals like brass – safety first! With these tips in mind, get creative and have fun with your next project!

Related Post