ThePipingMart Blog Metals How to Bend Copper Pipe 90 Degrees: A Step-By-Step Guide

How to Bend Copper Pipe 90 Degrees: A Step-By-Step Guide

How to Bend Copper Pipe 90 Degrees

Copper pipes are a great material to work with, especially if you’re looking to complete a DIY home project. But the challenge is bending copper pipes into the precise shape you need. Bending copper pipes can be tricky, but with the right tools and instructions, it’s easy enough for anyone to do. In this blog post, we will walk through how to bend copper pipe 90 degrees.

Tools You Will Need

Before starting your project, make sure that you have all of the necessary tools on hand. To successfully bend copper pipe 90 degrees, you will need a tubing bender, ruler, or measuring tape, and a vise grip pliers or adjustable wrench. Once you have gathered all of these items, you’re ready to begin!

Step 1: Measure Your Pipe

Using your ruler or measuring tape, measure out the length of your copper pipe. This is important because once bent, your pipe may not be as long as it was before. Make sure that whatever measurement you come up with is correct and accurate so that it will fit where you intend it to go in the end.

Step 2: Secure Your Pipe

Place your copper pipe in the tubing bender and secure it tightly using either vise-grip pliers or an adjustable wrench, depending on what type of bender you have. Secure each end tightly—you don’t want your pipe slipping out while bending!

Step 3: Bend Your Pipe

Now it’s time for the fun part—bending! Slowly begin to bend your pipe towards one side until it forms a 90-degree angle from its original position. As you bend, make sure that both ends remain secure so that there are no weak spots in your finished product. Once completed, remove your newly bent pipe from the tubing bender and double-check measurements to ensure accuracy before moving forward with installation!


With just three steps and some simple tools such as a tubing bender, ruler or measuring tape, and vise grip pliers or adjustable wrench – bending copper pipes into 90-degree angles is easy enough for anyone to do! This makes any home project that much easier when being done by yourself without professional help! So why not give it a try today? With these tips in mind and some practice working with copper piping – soon enough, you’ll be an expert at creating those perfect bends! Good luck!

Related Post