ThePipingMart Blog Metals How to Bend Copper Pipe without Bender

How to Bend Copper Pipe without Bender

How to Bend Copper Pipe without Bender

If you’re working on a DIY project and need to bend copper pipes, you may be wondering if it is possible to do so without a pipe bender. The answer is yes—it can be done with the help of a few simple tools. In this blog post, we’ll walk through the steps for bending copper pipes without using a pipe bender.

Tools Needed for Bending Copper Pipes Without a Bender

When bending copper pipes without a bender, there are three main tools you will need: two pieces of wood (or two lumber blocks), two C-clamps, and some sandpaper. The two pieces of wood should be at least three inches wide and one inch thick, while the C-clamps should be able to open up wide enough to fit around the width of your copper pipes. The sandpaper is used to remove any rough edges or burrs from the finished product.

Instructions for Bending Copper Pipes Without a Bender

Once you have all your supplies ready, here’s what you’ll need to do in order to successfully bend your copper pipe without using a pipe bender.

  • Place one piece of wood on top of the other and secure them together with the C-clamps. Make sure that each end of the wood piece is flush with the other when clamped down together.
  • Line up your copper pipe along one side of the wood pieces and secure it in place with another C-clamp. Make sure that the clamp is tight enough so that it won’t move during the process but not so tight that it bends or damages your copper pipe in any way.
  • Bend your copper pipe by applying pressure against it with one hand while pushing down on one end of the wood pieces with the other hand until you achieve your desired angle or curve in your pipe. This may take several attempts depending on how much pressure you apply and how sharp your desired angle is; don’t worry if it doesn’t turn out perfectly right away!
  • Once you have bent your copper pipe as desired, use some sandpaper to remove any burrs or rough edges from both sides of the bend before releasing it from its clamps and using it for whatever project you had planned on doing with it!


Bending copper pipes without using a pipe bender takes some practice but can be done with relative ease once you get the hang of it! With just three basic tools—two pieces of wood, two C-clamps, and sandpaper—you can easily create curves or angles in your copper pipes that would normally require an expensive specialized machine like a hydraulic tube bender or benchtop tubing bender! All that’s left now is for you to get started! Good luck!

Related Post