Are you planning to use a fitting to connect a branch from a run pipe or header? If yes, then you may have heard about Latrolet and Weldolet fittings. These fittings are commonly used in piping systems, but do you know the difference between the two? In this blog post, we will discuss the difference between Latrolet and Weldolet fittings so that you can choose the right one for your piping system.
What is Latrolet?
Latrolet is a type of yoga posture that involves stretching and strengthening the arms, shoulders, chest, core and back muscles. It requires tremendous balance and strength to maintain proper alignment. This pose tones the abs and brings peace to your body with deep breathing. It increases physical stamina, corrects postural imbalances, and improves spine flexibility when done correctly. It also helps open up your heart chakra for a sense of serenity. Moreover, Latrolet can help reduce stress levels by calming the mind and relieving tension in your upper abdomen.
What is Weldolet?
A weldolet is a forged fitting used in welding to branch off an existing run pipe, fitting, or valve, providing reinforcement and stress distribution. It is designed to weld onto the run connection and adds outlet branches for connecting additional system components. A Weldolet has a “branch” connection outlet that is identically sized with the branch diameter equal to the main pipe size. Hence, Weldolets are usually referred to by their nominal bore sizes rather than just “Weldolets”. Consequently, Weldolets have larger dimensions than other fittings, such as laterals and short tees, making them more suitable for larger piping systems.
Difference Between Latrolet and Weldolet
Definition:
Firstly, let’s define both Latrolet and Weldolet fittings. A Latrolet is a type of branch fitting with a threaded outlet used to make a 45-degree branch connection from a run pipe or header. On the other hand, a Weldolet is a type of branch fitting with a butt weld outlet that is used to make a 90-degree branch connection from a run pipe or header.
Material:
Latrolet and Weldolet fittings are made from different materials. Latrolet fittings are available in various materials, including carbon steel, stainless steel, and alloy steel. These fittings are commonly used for low-pressure applications. On the other hand, Weldolet fittings are made from the same material as the run pipe or header. These fittings offer great strength and durability, making them suitable for high-pressure applications.
Installation:
The installation process of Latrolet and Weldolet fittings is different. Installing a Latrolet requires a threaded outlet and is screwed onto the run pipe or header. Installing a Weldolet requires a butt weld outlet directly welded to the run pipe or header. Weldolets require a higher level of skill and are generally used by experienced welders.
Angle:
The angle of a Latrolet is 45 degrees, while the angle of a Weldolet is 90 degrees. This means that a Latrolet’s flow direction differs from a Weldolet’s. The flow direction from a Latrolet is at a 45-degree angle from the run pipe or header, while the flow direction from a Weldolet is at a 90-degree angle from the run pipe or header.
Cost:
Cost is another factor to consider when deciding between Latrolet and Weldolet fittings. Latrolet fittings are generally less expensive than Weldolet fittings. This is because Latrolet fittings are easier to manufacture and require less skilled labour.
Conclusion:
Latrolet and Weldolet fittings have different applications and come with their benefits. Choosing the right fitting for your piping system depends on the angle, material, installation process, and cost. Latrolet fittings are a great option for low-pressure systems as they are less expensive and easier to install. Weldolet fittings are more suitable for high-pressure systems as they offer greater strength and durability. You can choose the right fitting for your system by considering these factors. This blog post has helped you understand the difference between Latrolet and Weldolet fittings.
Meet Heer, a dynamic and driven writer learning tricks of her trade in the metal industry. With a background in Digital Marketing, Heer brings a unique perspective to her writing, sharing valuable insights. Apart from blogging she like reading and hiking.
