How to Bend Copper – An Overview
If you’re looking for a way to customize and add character to your projects, then bending copper is a great option. While it may seem intimidating at first, the process of bending copper is fairly straightforward and can be done with minimal experience or tools. Let’s take a look at how you can do it.
What You Need
Before you begin, there are few things you will need depending on the desired shape of your bent copper. For basic curves and angles, you will need some sort of clamping device—a vise works well for this—as well as a hammer or mallet. If you plan to bend the copper around circular forms like pipes or tubes, then you will also need a jig saw or drill press with an appropriate bit size to create the hole in which your copper will fit inside.
Steps for Bending Copper
Once you have gathered all the necessary tools, it’s time to start bending! Here are some tips to keep in mind while doing so:
- First, mark out where your bends should go (e.g., a 90-degree angle) by drawing lines with a marker on the copper sheet itself. This will give you something to refer back to while making adjustments.
- Place the marked-out piece into the clamping device and make sure it is firmly secured before attempting any bends. This will ensure that your bends come out even and consistent every time!
- Start small when making bends in order to get used to how much pressure is needed for various shapes and angles; if too much pressure is applied at once, it could cause damage or breakage in the copper sheet itself! 4. Once the desired shape has been achieved, use sandpaper or steel wool to smooth out any rough edges on the bent area(s).
- Finally, apply a clear coat sealer over the entire piece for added protection against oxidation (rusting). This step is especially important if your project will be exposed to water or other elements that could corrode its surface over time!
Conclusion:
With these simple steps, anyone can bend copper easily and safely without having special tools or expertise. And by following these steps correctly each time, you can create unique custom pieces that look professionally done! So grab some clamps and get started today – happy bending!
Meet Heer, a dynamic and driven writer learning tricks of her trade in the metal industry. With a background in Digital Marketing, Heer brings a unique perspective to her writing, sharing valuable insights. Apart from blogging she like reading and hiking.